Possum Hollow Bore Guide group to suit the bolt diameters approximately 17.7mm.
Please follow the “3 step” instructions here to help choose the correct bore guide within this group.
- Your bolt diameter needs to measure close to 0.695″ or 17.7mm to match the bore guides within this group!
- If your bolt is not of this diameter, then choose a different group of bore guides which matches your bolt diameter.
Step 1: Establish your bolt action is one of these models listed here. Also confirm your bolt diameter using calipers.
* Remington (all models)
*Winchester (all models)
* Ruger Model 77 (short and long)
* Savage 110 & 112v
* Stolle (Kelbly)
* Stiller (some)
* RPA Quad Lite
* Weatherby Varmintmaster
* Browning A-Bolt
* CZ 500
* Mauser 98
#1 17 Rem, Mach IV
#2 221, 222, 223, 222 mag, 204
#3 22 & 6mm PPC, 220swift
#4 22 & 6 BR, 22-250, 243, 25-06, 6BRX, 6x47L,
#5 7-08, 308, 30-06, 300sav, 7BR, 270, 280, 7×57, 8×57, 6.5x47L
#6 7mm & 30 standard mags
#7 338 win
#41 7mm & 30 Ultra mag
#131 22-6.5 WSM, 22-6.5 SAUM, 26 Nosler
#171 204 Ruger, 20 Tact, 20 Vartag
Step 3: Use the Dropdown menu above “Choose an option”, to select the appropriate bore guide part number (#) and then, ADD TO CART.
CHOOSING FROM THE LIST:-
- Choose a corresponding bore guide part number from the dropdown bar above. Once you select any one, the ‘in stock’ quantity of that will display.
- If you need two or more guides within this particular group listing, simply add to cart, one at a time.
- As always, if any item says sold out after being selected, you cannot add to cart. But you can register for an automatic email alert to notify you immediately when it is back in stock.