KM Controlled Depth Tapered Reamers – 17cal to BMG


Select the size range here…

SKU: C1045 Category: Tag:



The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer.  The chamfer angle is 4 degrees per side.  The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.



6mm, 17 cal, 338, 35, 408, 416, 50, BMG