Ultramount Leg Set 7.5inch InLIne Fabrication


7 in stock

SKU: ULEGJR Category: Tag:


Ultramount Leg Set 7.5 inch InLine Fabrication

  • This leg set is the mid size of the 3 types of InLine leg sets available and consists of 2 x legs (7-1/2″)
  • Works with the range of Dedicated Press Top plates available to suit most presses and bolt directly on top of these legs.
  • Or works with the “Quick Change” system (the Quick Change” system consists of two different tops).
  • In the QC system the plate which bolts on top of these 7-1/2″″ legs is called a “Quick Change Base Plate”. Then a second plate, called QC Top plate will slot into the QC Base plate. QC Top Plates are available for all the  different types of presses and other accessories also.
  • The 7-1/2″ leg height is ideal where there is less available height above the bench for your press to fit the tall 9-3/4″ set.
  • This 7-1/2″ high leg set may require fitting near the front edge of the bench.  You would need to take into account your press handle and linkage system movement so it does not contact on the bench if setting back from the edge..

NB: There is a 4″ leg size available for lower mounting needs. There is also a mount system for fitting directly onto the bench top. But that system is only for the Quick Change plate arrangement system and it is called the “Flush Mount Quick Change system”.

Illustrations of the three different leg height sets.  9-3/4″ Tall,  7-1/2″ Mid and 4.0″ Micro

Click this image for video on side by side comparisons…


You may also like…