Spuhr Mount 34mm SP-4011


8 in stock

SKU: SP-4011 Category: Tag:


Spuhr Mount 34mm SP-4011

“The GAP Mount” Made on request from George Gardner of GA Precision. Special mount with extra low height. Due to the low height it will not work with scopes like S&B 5-25 and 3-20, the Kahles k624i, or Vortex Razor as the erector housing will collide with the bridge between the rings. Will fit Bushnell scopes and S&B 3-12×50 and 4-16×50. Aiside from the low height a special feature of this mount is an extra front clamping screw allowing the SP-4011 to be mounted partly forward – in a cantilever position – on the Picatinny rail of the action. This is especially useful on AR-type rifles and actions with integrated Picatinny rails like Defiance, Surgeon and Impact, where the rail isn’t sufficiently long for the desired eye-relief with some scopes.

Height: 28 mm/1.102”
Clearance: 5.5 mm/.216″ (from the bottom of the tube to bridge of the mount body)
Length: 121 mm/4.76”
Weight: 231 g/8.1 oz

10-degree wedge included

The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011). The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values. The mount is shipped with a manual and a “wedge” leveling key.