Redback Barrel Vice Model A

$140.00

5 in stock

SKU: RPE010 Category: Tag:

Description

Redback Barrel Vice Model A

  • For removing “match type” barrels, For example custom gunsmithed. NOT FOR REMOVAL OF ANY FACTORY BARRELS (which are fitted extremely tight)
  • This model allows you to insert barrels with tuners attached at muzzle.(see supplementary photo)
  • Without having to completely remove the top section as when loosened will swing away to the side.
  • Will fit barrel approx 0.800″ to 1.500″ at the muzzle end

 

Operating Instructions –Redback Precision  Barrel Vice and Action Wrenches

Fix the Barrel vice firmly to the bench with 2 steel ‘G’ type clamps or mechanical fixings

  • Insert into vice with a paper sleeve around barrel – suggest 1 layer of photo copy paper to prevent marring
  • Tighten the 2 vice nuts equally as required to prevent slippage
  • Insert Action wrench so the wrench bar is horizontal (3 lug only)
  • Turn in a counter – clockwise direction to loosen barrel.
  • S. barrels require suitable anti seize applied to threads.
  • Re-tension as required

Please note:

  • These Action Wrenches are not for the removal of factory fitted and tensioned barrels.
  • Only to be used with wrench handle supplied and must not be extended
  • Only to be used with low tension switch barrel systems
  • Head space and tension should be checked by a competent person.
  • Cannot be used with original Sportco or Omark barrel fit (adaptor required)

You may also like…