Description
Redback Barrel Vice Model A
- For removing “match type” barrels, For example custom gunsmithed. NOT FOR REMOVAL OF ANY FACTORY BARRELS (which are fitted extremely tight)
- This model allows you to insert barrels with tuners attached at muzzle.(see supplementary photo)
- Without having to completely remove the top section as when loosened will swing away to the side.
- Will fit barrel approx 0.800″ to 1.500″ at the muzzle end
Operating Instructions –Redback Precision Barrel Vice and Action Wrenches
Fix the Barrel vice firmly to the bench with 2 steel ‘G’ type clamps or mechanical fixings
- Insert into vice with a paper sleeve around barrel – suggest 1 layer of photo copy paper to prevent marring
- Tighten the 2 vice nuts equally as required to prevent slippage
- Insert Action wrench so the wrench bar is horizontal (3 lug only)
- Turn in a counter – clockwise direction to loosen barrel.
- S. barrels require suitable anti seize applied to threads.
- Re-tension as required
Please note:
- These Action Wrenches are not for the removal of factory fitted and tensioned barrels.
- Only to be used with wrench handle supplied and must not be extended
- Only to be used with low tension switch barrel systems
- Head space and tension should be checked by a competent person.
- Cannot be used with original Sportco or Omark barrel fit (adaptor required)